Mold-Care is the industry’s leading weapon against mold. It acts as a surface-protectant, killing all forms of fungi, sanitizing and disinfecting the treated area. Bora-Care is the industry’s leading borate-based wood preservative, rendering treated wood impervious to termites and other wood destroying insects, as well as wood decay fungi. It actually diffuses into the wood where it remains for the life of the wood, providing residual protection. When used together, they create a highly effective solution to insects and mold.
As you can see in this picture, the right half of this wood was treated with Bora-Care with Mold-Care, the left half was left untreated. The wood was placed in a mold incubator for six months. Mold will not grow on the treated side, while the untreated side is covered with mold.
Specifically designed to work with Bora-Care, Mold-Care prevents the establishment of dry rot, wet rot and mold. Bora-Care adds additional residual protection against decay fungi and insect infestation. Bora-Care with Mold-Care can be applied to bare wood, plywood, particleboard, drywall and OSB. And it’s the best approach you can take against mold. Bora-Care with Mold-Care is designed to penetrate wood; it doesn’t just remain on the surface, but is absorbed into the interior of wood to protect it from the inside out.
1 gallon of Bora-Care with Mold-Care mixed with five gallons of water will treat 400 board feet of wood or 400 square feet of sheathing, insulation or drywall.
MORE INFORMATION
